Description
Refrigerated Centrifuge Digtor 22R with large capacity+ Rotor: Swing out for 4 tubes of 750 ml + adaptors for 20 tubes of 50 ml conical RE 472 and 52 tubes of 15 ml conical RE 347
The largest of our refrigerated benchtop centrifuges that offers the maximum perShapence. With an ergonomic design that enables easy loading of the rotor, as well as traceability of the position of the samples for easy identification of the charge balance. It has a wide range of accessories that offer capacity for tubes of 750 ml., microplates, microtubes and a great number of positions for the more common use tubes of 15 ml. conical, 50 ml. conical, 15 ml., 10 ml., and 5 ml.
Its colour TFT touch screen offers perShapence that enables, in addition to controlling the equipment by operational parameters, the possibility of exporting data for analysis and timer programmed operation. The autonomy that this equipment gives to the user reduces the work time, by the automatization of the cycles and work modes, ensuring the process traceability. It has a refrigeration system that enables it to maintain the minimum temperature of the chamber below 4°C regardless of the type of rotor and the speed selected.
Shows RPM and RCF, time, temperature, acceleration/deceleration values (PCBS) and unbalancing location system (ULS).
Speed programming in 10 RPM/10 xg steps.
Real RCF values on screen based in accessories configuration.
Count up/down from “0” or at “set RPM/RCF” for test reproducibility.
Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.
Timer from 1 min to 99 hours programmable in 1 sec. steps and hold position.
PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.
ULS: Unbalancing location system indicating on the screen the number of the bucket which produces the unbalance switch off.
40 programmable memories, with protection under password.
Several acoustic and visual messages warning the user the device situation.
Microprocessor controlled. PC connection.
Induction motor maintenance free (brushless).
Rotors and adapters list on memory.
Noise level: below 60 dB.
Start, stop, open lid and short spin with adjustable speed buttons.
Option of free/locked adjustment of RPM/ RCF along the run.
Low heigh for easy access.
Last values remain in memory.
Automatic rotor recognition. Over-speed protection.
Remains the refrigeration after centrifugation process.
Precooling program with rotor spinning and temperature selectable.
Guarantee 4 °C at maximum RPM.
Temperature range from -20°C (-4°F) to 40°C (104°F) in 1°C/1°F steps. Programmable in °C o °F.
Temperature sensor inside the chamber.
Gas R 449A HFO (CFC free).
Max. capacity: 4 x 750 ml.
Max. speed: 21.948 xg / 14.300 RPM
Voltage: 220-240 V 50 Hz
Other voltages available: 110-120 V 60 Hz (Check prices)
Reviews
There are no reviews yet.